RS4E-B42ACMPCXH - Rainsaver MK4E & Multistage Pump with SK13BA controller in a stainless steel enclo

Code: 805665

Print
Product Code
RS4E B42ACMPCXH
RRP: $1056.00

Where to Buy

Find Your Nearest Store
Technical Specifications
Product Type Submersible Pump
Brand Bianco Rainsaver
Suitable For Clean Water
Flow Range Category b. 100 - 199 L/min
Flow Rate (L/min) 105 L/min
Float Float Included
Hp 0.75 Hp
kPa 320 kPa
Kilo Watts 0.55 kW
Head Range Category a. 0 - 39 m
Head (max) 32 m
Port Size Outlet 1" BSPF outlet
Powered Electric
Taps 10 Taps
Warranty (months) 24 Months
Volts 240 V
Watts 550 W
Pack Weight
0.00
Description
Rainsaver MK4E & BIA-B42ACMPCXH
High Head Multistage Submersible 550W Clean Water. Automatic with built in riser.
Rainwater/Mains changeover device with separate adjustable auto restart pump controller mounted in stainless steel enclosure.
10 Taps, 320 kPa, 105 L/m, 10m power cable
Control Features
  • Rainsaver MK4E Changeover Device.
  • 2 Year Rainsaver MK4E Infield Warranty
  • 12V Low voltage Float.
  • WaterMark approved for connection to all town water supplies.
  • Aesthetically designed and requires no weather proofing.
  • IP33

Notes

Pressure Systems calculated at 10 L/m

Warranty

2 Year Rainsaver MK4E Infield Warranty



Approvals

WaterMark Approved

WATERMARK APPROVAL - ATS 5200.477:2006.

The WaterMark Certification Scheme is a mandatory certification scheme for plumbing and drainage products to ensure that plumbing and drainage materials and products are fit for purpose and appropriately authorised for use in plumbing installations.

The Plumbing Code of Australia requires certain plumbing and drainage materials and products to be certified and authorised for use in a plumbing or drainage installation. These materials and products are to be certified through the WaterMark Certification Scheme and listed on the WaterMark Product Database.

WaterMark Approval Logo

In order to achieve Watermark Certification, the subject material or product must:

  • be tested by a recognised testing laboratory;
  • comply with an approved specification (either a relevant existing standard or an approved WaterMark Technical Specification);
  • be manufactured in accordance with an approved Quality Assurance Program; and
  • carry a warranty.

Materials and products complying fully with the applicable requirements of the WaterMark Certification Scheme are then eligible to be certified by a WaterMark Conformity Assessment Body (WMCAB) and listed on the WaterMark Product Database.

Certified materials and products are identifiable by the WaterMark trademark, which must be displayed on the material or product upon the granting of a WaterMark Certificate of Conformity.

Read more about WaterMark Approvals